当前位置:首页 > 产品中心
  • 速冷速热高光模温机
  • 所属类别:模温机系列

高光过热水模温控制机应用:
目前在家电、汽车、通讯、日用品、医疗器械等行业具有广泛应用前景,例如液晶电视机、电脑液晶显示器、笔记本电脑、手机、空调、汽车液晶显示器、汽车内饰件、车灯和光学、OA、AV仪器等行业。

高光过热水模温控制机优点:
·消除产品表面熔接线、溶接痕、波纹、银丝纹
·彻底解决塑料产品的表面缩水现象
·提高产品表面光洁度,是表面光洁度达到镜面
·产品不需要喷漆后续加工,提高成品率20-30%
·使薄壁成型提高注塑流动性,提高产品品质和强度
·使厚壁成型注塑周期可降低60%以上,增加塑料的流动性及填充效果
·95%的热能回收
·100%介质回收
·无需连接锅炉及其他外置温控辅助设备,省略复杂的锅炉设备(高压设备安全和环保的审批)和管道工程
·安全解决锅炉之蒸汽不可回收的能耗大问题
·体积小可随时移动配合不同机台使用,180℃热水完全代替锅炉的不环保现象
 
·High-gloss traceless injection mould superheated water temperature control unit
·Eliminate soluble wiring,melted marks, corrugated, silver marks on the product surface
·Completely solve the surface of the plastic products
·Improve the product surface finish, the surface roughness is similar to mirror
·Products do not need to paint the subsequent processing, improve the rate of finished products of 20- 30%
·Solve the fiber products floating fiber problem,Make the product quality perfect.
·The thin-wall molding can improve the liquidity of injection,improve product quality and indensity
·95% of the heat energy recovery
·100% medium recovery
·Without connecting boiler and other external temperature control of auxiliary equipment, omit complex boiler equipment (high voltageequipment safety and environmental protection approval) and pipeline project
·Completely solve the problem of the boiler steam on-recyclable
·Small Volume can match different machines,180℃ hot water can replace the boiler,which is not environmental friendly
 
 高光过热水模温控制机特点:
·10.4寸液晶真彩LCD显示(可选),触摸式中文数字输入,全中文界面,操作简单。
·全闭环系统控制输入输出温度的检测,以模具实际温度反馈PLC,数彩图变化显示,确保输出准确稳定。
·整机采用欧美进口元器件
·单双路模具温度检测(可选),输入输出管道采用不锈钢管,多组输入输出接口。
·整机配件:加热、冷却、冷热转换控制功能。
·高温热水,冷却水的回收系统,节能效果明显。